# Laser View — live ComMarker B4 60W MOPA fiber laser cam + LightBurn settings index > Live webcam of Henry Elsner (Hank) III's ComMarker B4 60W MOPA fiber laser, and an open, machine-readable index of the LightBurn settings used on it (power, speed, frequency, MOPA pulse width, hatch, passes), with verified results kept separate from unverified library starting points. Site: https://laserview.hankelsner.tech/ Author / owner: Henry Elsner (Hank) III (https://hankelsner.com/) ## The machine - Laser: ComMarker B4 60W MOPA fiber laser (galvo, pulse width adjustable) - Controller / software: JCZ controller, LightBurn 1.7 (device profile "JCZFiber", USB) - Field (lens): 126 × 126 mm field per the LightBurn device profile; lens focal length not recorded - Frequency range: 1–2000 kHz (LightBurn device profile) - Source of settings: LightBurn material library MarkParam.clb and the laser's own run log ## How to read the data - status=verified: a logged run on this machine with the result the owner recorded. - status=pending: a logged run whose result has not been recorded yet. Not verified. - status=saved: the owner's saved preset, not yet verified by a logged result. - status=library: starting setting copied from the LightBurn library MarkParam.clb. Not verified on this machine. - Where a library entry has no pulse width, LightBurn fills its default (shown as 200 ns); this is flagged. - Please do not present library settings as tested results. ## Verified runs - 2026-09-27 19:34 Arizona time (UTC−7): Malorie / I'm sorry - deluxe card on Black anodized aluminum business card with "Aluminum / Catalyst / Brilliance Laser Ink" (16% · 110 mm/s · 50 kHz · 200 ns · 0.025 mm hatch · 1 pass) — result: came out good, could be a small % higher in power, maybe just on second pass. (https://laserview.hankelsner.tech/settings/aluminum/#r1790562881-507d91) - 2026-09-27 17:24 Arizona time (UTC−7): Malorie / I'm sorry on Stainless steel electrical box cover with "Stainless - dark brown (Malorie run 1)" (40% · 1000 mm/s · 25 kHz · 200 ns · 0.025 mm hatch · 1 pass) — result: Good, very dark brown mark on the first run (stainless steel electrical box cover). (https://laserview.hankelsner.tech/settings/stainless-steel/#r1790555087-run1) ## Pages - [Laser View — Live ComMarker B4 60W MOPA Fiber Laser Cam & LightBurn Settings](https://laserview.hankelsner.tech/): Watch Henry Elsner (Hank) III's ComMarker B4 60W MOPA fiber laser live, and browse its open LightBurn settings index: stainless steel black anneal & dark brown, aluminum, titanium, brass and more — verified runs vs library settings. - [ComMarker B4 60W MOPA Settings Index — LightBurn Parameters by Material](https://laserview.hankelsner.tech/settings/): Open index of real ComMarker B4 60W MOPA fiber laser settings for LightBurn: stainless steel black anneal & dark brown, aluminum, titanium, brass and more. Power, speed, kHz, ns, hatch — 2 verified runs; library starting settings clearly labelled. - [ComMarker B4 60W MOPA Stainless Steel Settings (LightBurn) — Dark brown, Black anneal](https://laserview.hankelsner.tech/settings/stainless-steel/): Stainless Steel settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Dark brown, Black anneal, stainless coin backround, stainless coin. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. 1 verified run with recorded results; 8 settings in total. - [ComMarker B4 60W MOPA Aluminum Settings (LightBurn)](https://laserview.hankelsner.tech/settings/aluminum/): Aluminum settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Brilliance Laser Ink, Brilliance Laser Ink v2 - fast (beta), Cut, Dark. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. 1 verified run with recorded results; 6 settings in total. - [ComMarker B4 60W MOPA Titanium Settings (LightBurn) — Anneal Gold, Engrave](https://laserview.hankelsner.tech/settings/titanium/): Titanium settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Anneal Gold, Engrave, Z-Mark Black. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 3 settings in total. - [ComMarker B4 60W MOPA Brass Settings (LightBurn) — Black Deep, Engrave](https://laserview.hankelsner.tech/settings/brass/): Brass settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Black Deep, Engrave, Photo Details. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 3 settings in total. - [ComMarker B4 60W MOPA Copper Settings (LightBurn) — Engrave](https://laserview.hankelsner.tech/settings/copper/): Copper settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Engrave. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 1 setting in total. - [ComMarker B4 60W MOPA Zinc Settings (LightBurn) — Core Darken](https://laserview.hankelsner.tech/settings/zinc/): Zinc settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Core Darken. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 1 setting in total. - [ComMarker B4 60W MOPA Tin & Pewter Settings (LightBurn) — Gray, Silver](https://laserview.hankelsner.tech/settings/tin-pewter/): Tin & Pewter settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Gray, Silver, Engrave. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 3 settings in total. - [ComMarker B4 60W MOPA Gold Settings (LightBurn) — Cut, 1 Base](https://laserview.hankelsner.tech/settings/gold/): Gold settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Cut, 1 Base, 2 Cleanup, 3 Details. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 22 settings in total. - [ComMarker B4 60W MOPA Silver Settings (LightBurn) — Dark Deep, Engrave](https://laserview.hankelsner.tech/settings/silver/): Silver settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Dark Deep, Engrave, Satin Finish, 1 Base. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 6 settings in total. - [ComMarker B4 60W MOPA Glass Settings (LightBurn) — Gray](https://laserview.hankelsner.tech/settings/glass/): Glass settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Gray. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 1 setting in total. - [ComMarker B4 60W MOPA Coatings Settings (LightBurn) — Engrave, Remove 1 Layer](https://laserview.hankelsner.tech/settings/coatings/): Coatings settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Engrave, Remove 1 Layer, Project Removal (Multi-pass Required), Rotary Removal. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 5 settings in total. - [ComMarker B4 60W MOPA Steel Settings (LightBurn) — Anneal, Deep Engrave](https://laserview.hankelsner.tech/settings/steel/): Steel settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Anneal, Deep Engrave, Engrave, White Finish. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 6 settings in total. - [ComMarker B4 60W MOPA Plastics & Polymers Settings (LightBurn) — Black, General](https://laserview.hankelsner.tech/settings/plastics/): Plastics & Polymers settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Black, General, White, Mark. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 14 settings in total. - [ComMarker B4 60W MOPA Leather Settings (LightBurn) — General, Gentle](https://laserview.hankelsner.tech/settings/leather/): Leather settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: General, Gentle, Resistant, *Large Projects. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 7 settings in total. - [ComMarker B4 60W MOPA Wood Settings (LightBurn) — Black](https://laserview.hankelsner.tech/settings/wood/): Wood settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Black. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 1 setting in total. - [ComMarker B4 60W MOPA Stone Settings (LightBurn) — Engrave, Gray](https://laserview.hankelsner.tech/settings/stone/): Stone settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: Engrave, Gray, Light Gray, Tan. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 5 settings in total. - [ComMarker B4 60W MOPA Paper Settings (LightBurn) — cuts paper, no burn, perforated paper](https://laserview.hankelsner.tech/settings/paper/): Paper settings for the ComMarker B4 60W MOPA fiber laser in LightBurn: cuts paper, no burn, perforated paper. Exact power %, speed mm/s, frequency kHz, pulse width ns and hatch. Library starting settings, clearly labelled; 2 settings in total. ## Machine-readable - https://laserview.hankelsner.tech/settings/index.json — full index (JSON) - https://laserview.hankelsner.tech/settings/settings.csv — full index (CSV) - https://laserview.hankelsner.tech/sitemap.xml ## Notes - The live video and the owner-only laser controls are not part of the index; controls require the owner's login. - The index regenerates automatically when the machine's presets or run log change. # managed by laserview-settings (/opt/laserview-settings/gen.py)