B4 MOPA stainless colour test - ROUND 1 (ready to burn) Card: 85x55 mm stainless business card, centred at (63,63) in the 126x126 field (x 20.5-105.5, y 35.5-90.5). Manual height/focus. Files (burn in order, DO NOT move the card between runs - absolute positions): stainless_color_test_r1_runA.lbrn2 rows 1-4 (black, gray, silver, brown) + LABELS/fiducials ~3.6 min est. stainless_color_test_r1_runB.lbrn2 rows 5-8 (orange/bronze, gold, green, teal) ~3.7 min est. stainless_color_test_r1_runC.lbrn2 rows 9-12 (blue, purple, red/rose, 12 = exploration) ~3.3 min est. Total raw estimate 10.6 min (LightBurn has run up to 3.29x short on deep jobs here; worst case ~35 min). Let the card cool between runs. Layers per file: 24 cell layers (C00-C23) + LABELS (C28, output ON in run A only) + FRAME ONLY (C29, output OFF, 85x55 + 4 mm cross). Cell fills: 5x3 mm, bi-directional, start angle 0, angle increment 90 deg per pass when passes>1, LightBurn Crosshatch checkbox OFF. Columns: 60 / 75 / 90 / 100 = % of the source (JPT M7 + F290) power; F- / F+ = frequency x0.7 / x1.4 at 75 %. Row 12 = exploration (labels 60..F+ are just positions). LABELS: Steel/General/Engrave 45 %, 500 mm/s, 25 kHz, 200 ns, 0.025 mm, crosshatch 45 deg. TL corner square (2.8 mm) is the orientation fiducial. After burning: flatbed scan at 600 dpi, colour, auto-enhance OFF, card flat. Then: optimizer.py ingest scan.png round1/key.csv