B4 MOPA stainless colour test - ROUND 2 (ready to burn) Card: fresh 85x55 mm stainless business card centred at (63,63) in the 126x126 field (x 20.5-105.5, y 35.5-90.5); 82x52 mm test area. Manual height/focus. Files (burn in order, DO NOT move the card between runs - absolute positions): stainless_color_test_r2_runA.lbrn2 rows 1-2 (black, gray) + LABELS + 4 fiducials ~2.9 min est. stainless_color_test_r2_runB.lbrn2 rows 3-4 (silver, brown) ~2.4 min est. stainless_color_test_r2_runC.lbrn2 rows 5-6 (orange/bronze, gold) ~3.0 min est. stainless_color_test_r2_runD.lbrn2 rows 7-8 (green, teal) ~1.9 min est. stainless_color_test_r2_runE.lbrn2 rows 9-10 (blue = sweep around R1-0904, purple = sweep around R1-0106) ~3.3 min est. stainless_color_test_r2_runF.lbrn2 rows 11-12 (red/rose, deep blue = sweep around R1-0805 @ 2 passes) ~2.8 min est. Total raw estimate 16.2 min (LightBurn has run up to 3.29x short on deep jobs here; worst case ~53 min). Let the card cool between runs. Cells: 3x3 mm, 168 cells = 12 rows x 14 columns. Each row = one target colour. col 1-4 : same total energy E spread over 1 / 2 / 3 / 4 passes (higher power + fewer passes vs same energy over more passes) col 5-8 : second energy level over 1 / 2 / 3 / 4 passes (+35 %; tight 0.9E/1.1E for blue & purple, 0.85E/1.0E for deep blue) col 9-10 : angle increment 45 deg / 0 deg (deep blue, blue, teal, purple, green, gold rows); other rows: extra model steps col 11-12: model (Gauss-Newton) steps toward the target; col 13-14: exploration Fills bi-directional, start angle 0, angle increment per pass as listed in key.csv (90 unless the cell says 45/0), LightBurn Crosshatch checkbox OFF. LABELS (run A only): Steel/General/Engrave 45 %, 500 mm/s, 25 kHz, 200 ns, 0.025 mm. TL corner square (2.8 mm) = orientation fiducial. FRAME ONLY layer is output OFF. After burning: 600 dpi flatbed scan AND 3-4 angled phone photos in diffuse daylight (whole card + all 4 corner squares in frame). Then: optimizer.py ingest scan.png round2/key.csv ; optimizer.py photos round2/key.csv photo1.jpg photo2.jpg ... Please note by eye which cells look blue / purple / teal (e.g. "row 9 col 2 = blue") - by-eye readings rank highest.