{
 "name": "ComMarker B4 60W MOPA fiber laser settings index (LightBurn)",
 "url": "https://laserview.hankelsner.tech/settings/",
 "publisher": "Henry Elsner (Hank) III",
 "machine": {
  "model": "ComMarker B4 60W MOPA fiber laser",
  "facts": {
   "Laser": "ComMarker B4 60W MOPA fiber laser (galvo, pulse width adjustable)",
   "Controller / software": "JCZ controller, LightBurn 1.7 (device profile \"JCZFiber\", USB)",
   "Field (lens)": "126 × 126 mm field per the LightBurn device profile; lens focal length not recorded",
   "Frequency range": "1–2000 kHz (LightBurn device profile)",
   "Source of settings": "LightBurn material library MarkParam.clb and the laser's own run log"
  }
 },
 "status_legend": {
  "verified": "logged run on this machine with a recorded result (or a setting used in such a run)",
  "pending": "logged run, result not recorded yet (not verified)",
  "saved": "owner's saved preset, not yet verified by a logged result",
  "library": "starting setting from the LightBurn library (MarkParam.clb), not yet verified"
 },
 "data_last_changed": "2026-09-28T03:47:18Z",
 "materials": [
  {
   "slug": "stainless-steel",
   "label": "Stainless Steel",
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/",
   "settings": 8,
   "runs": 8
  },
  {
   "slug": "aluminum",
   "label": "Aluminum",
   "url": "https://laserview.hankelsner.tech/settings/aluminum/",
   "settings": 6,
   "runs": 3
  },
  {
   "slug": "titanium",
   "label": "Titanium",
   "url": "https://laserview.hankelsner.tech/settings/titanium/",
   "settings": 3,
   "runs": 0
  },
  {
   "slug": "brass",
   "label": "Brass",
   "url": "https://laserview.hankelsner.tech/settings/brass/",
   "settings": 3,
   "runs": 0
  },
  {
   "slug": "copper",
   "label": "Copper",
   "url": "https://laserview.hankelsner.tech/settings/copper/",
   "settings": 1,
   "runs": 0
  },
  {
   "slug": "zinc",
   "label": "Zinc",
   "url": "https://laserview.hankelsner.tech/settings/zinc/",
   "settings": 1,
   "runs": 0
  },
  {
   "slug": "tin-pewter",
   "label": "Tin & Pewter",
   "url": "https://laserview.hankelsner.tech/settings/tin-pewter/",
   "settings": 3,
   "runs": 0
  },
  {
   "slug": "gold",
   "label": "Gold",
   "url": "https://laserview.hankelsner.tech/settings/gold/",
   "settings": 22,
   "runs": 0
  },
  {
   "slug": "silver",
   "label": "Silver",
   "url": "https://laserview.hankelsner.tech/settings/silver/",
   "settings": 6,
   "runs": 0
  },
  {
   "slug": "glass",
   "label": "Glass",
   "url": "https://laserview.hankelsner.tech/settings/glass/",
   "settings": 1,
   "runs": 0
  },
  {
   "slug": "coatings",
   "label": "Coatings (Powder Coat, Cerakote, Plating)",
   "url": "https://laserview.hankelsner.tech/settings/coatings/",
   "settings": 5,
   "runs": 0
  },
  {
   "slug": "steel",
   "label": "Steel",
   "url": "https://laserview.hankelsner.tech/settings/steel/",
   "settings": 6,
   "runs": 0
  },
  {
   "slug": "plastics",
   "label": "Plastics & Polymers",
   "url": "https://laserview.hankelsner.tech/settings/plastics/",
   "settings": 14,
   "runs": 0
  },
  {
   "slug": "leather",
   "label": "Leather",
   "url": "https://laserview.hankelsner.tech/settings/leather/",
   "settings": 7,
   "runs": 0
  },
  {
   "slug": "wood",
   "label": "Wood",
   "url": "https://laserview.hankelsner.tech/settings/wood/",
   "settings": 1,
   "runs": 0
  },
  {
   "slug": "stone",
   "label": "Stone (Granite, Slate)",
   "url": "https://laserview.hankelsner.tech/settings/stone/",
   "settings": 5,
   "runs": 0
  },
  {
   "slug": "paper",
   "label": "Paper",
   "url": "https://laserview.hankelsner.tech/settings/paper/",
   "settings": 2,
   "runs": 0
  }
 ],
 "runs": [
  {
   "id": "r1790562881-507d91",
   "at": "2026-09-28T02:34:41Z",
   "date": "2026-09-27 19:34 Arizona time (UTC−7)",
   "job": "Malorie / I'm sorry - deluxe card",
   "workpiece": "Black anodized aluminum business card",
   "group": "aluminum",
   "setting_id": "aluminum-catalyst-brilliance-laser-ink",
   "setting_name": "Aluminum / Catalyst / Brilliance Laser Ink",
   "params_edited": false,
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 16,
    "min_power_pct": 12,
    "speed_mm_s": 110,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "grid_summary": null,
   "status": "verified",
   "result": "came out good, could be a small % higher in power, maybe just on second pass.",
   "rating": 4,
   "photo": "https://laserview.hankelsner.tech/settings/photos/r1790562881-507d91/p1790563417411-26e4b6-1600.jpg",
   "photo_kind": "auto",
   "photos": [
    {
     "url": "https://laserview.hankelsner.tech/settings/photos/r1790562881-507d91/p1790563417411-26e4b6-1600.jpg",
     "thumbnail": "https://laserview.hankelsner.tech/settings/photos/r1790562881-507d91/p1790563417411-26e4b6-640.jpg",
     "type": "auto webcam snapshot",
     "stage": "end",
     "taken": "2026-09-28T02:43:34Z",
     "caption": null
    },
    {
     "url": "https://laserview.hankelsner.tech/settings/photos/r1790562881-507d91/p1790563417374-737160-1600.jpg",
     "thumbnail": "https://laserview.hankelsner.tech/settings/photos/r1790562881-507d91/p1790563417374-737160-640.jpg",
     "type": "auto webcam snapshot",
     "stage": "mid",
     "taken": "2026-09-28T02:39:09Z",
     "caption": null
    },
    {
     "url": "https://laserview.hankelsner.tech/settings/photos/r1790562881-507d91/p1790562889054-42d271-1600.jpg",
     "thumbnail": "https://laserview.hankelsner.tech/settings/photos/r1790562881-507d91/p1790562889054-42d271-640.jpg",
     "type": "auto webcam snapshot",
     "stage": "start",
     "taken": "2026-09-28T02:34:47Z",
     "caption": null
    }
   ],
   "url": "https://laserview.hankelsner.tech/settings/aluminum/#r1790562881-507d91"
  },
  {
   "id": "r1790555087-run1",
   "at": "2026-09-28T00:24:47Z",
   "date": "2026-09-27 17:24 Arizona time (UTC−7)",
   "job": "Malorie / I'm sorry",
   "workpiece": "Stainless steel electrical box cover",
   "group": "stainless-steel",
   "setting_id": "stainless-dark-brown-malorie-run-1",
   "setting_name": "Stainless - dark brown (Malorie run 1)",
   "params_edited": false,
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 40,
    "min_power_pct": 40,
    "speed_mm_s": 1000,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "The job file set no pulse width, so LightBurn's default applied; the run log records 200 ns."
   },
   "grid_summary": null,
   "status": "verified",
   "result": "Good, very dark brown mark on the first run (stainless steel electrical box cover).",
   "rating": null,
   "photo": null,
   "photo_kind": null,
   "photos": [],
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#r1790555087-run1"
  },
  {
   "id": "r1790566524-3f4704",
   "at": "2026-09-28T03:35:24Z",
   "date": "2026-09-27 20:35 Arizona time (UTC−7)",
   "job": "Black anneal test grid (stainless)",
   "workpiece": "Stainless scrap",
   "group": "stainless-steel",
   "setting_id": null,
   "setting_name": "fixed test grid",
   "params_edited": false,
   "params": null,
   "grid_summary": "5x5 black-anneal test grid: frequency 120/150/190/240/300 kHz (rows, top->bottom) x speed 200/265/330/400/500 mm/s (columns, left->right); all cells 15 % power, 200 ns Q-pulse, 0.025 mm @45 deg cross-hatch, 1 pass (MarkParam Steel/General/Anneal base)",
   "status": "pending",
   "result": null,
   "rating": null,
   "photo": null,
   "photo_kind": null,
   "photos": [],
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#r1790566524-3f4704"
  },
  {
   "id": "r1790566480-0eacae",
   "at": "2026-09-28T03:34:40Z",
   "date": "2026-09-27 20:34 Arizona time (UTC−7)",
   "job": "Black anneal test grid (stainless)",
   "workpiece": "Stainless scrap",
   "group": "stainless-steel",
   "setting_id": null,
   "setting_name": "fixed test grid",
   "params_edited": false,
   "params": null,
   "grid_summary": "5x5 black-anneal test grid: frequency 120/150/190/240/300 kHz (rows, top->bottom) x speed 200/265/330/400/500 mm/s (columns, left->right); all cells 15 % power, 200 ns Q-pulse, 0.025 mm @45 deg cross-hatch, 1 pass (MarkParam Steel/General/Anneal base)",
   "status": "pending",
   "result": null,
   "rating": null,
   "photo": null,
   "photo_kind": null,
   "photos": [],
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#r1790566480-0eacae"
  },
  {
   "id": "r1790566349-ea93c6",
   "at": "2026-09-28T03:32:29Z",
   "date": "2026-09-27 20:32 Arizona time (UTC−7)",
   "job": "Black anneal test grid (stainless)",
   "workpiece": "Stainless scrap",
   "group": "stainless-steel",
   "setting_id": null,
   "setting_name": "fixed test grid",
   "params_edited": false,
   "params": null,
   "grid_summary": "5x5 black-anneal test grid: frequency 120/150/190/240/300 kHz (rows, top->bottom) x speed 200/265/330/400/500 mm/s (columns, left->right); all cells 15 % power, 200 ns Q-pulse, 0.025 mm @45 deg cross-hatch, 1 pass (MarkParam Steel/General/Anneal base)",
   "status": "pending",
   "result": null,
   "rating": null,
   "photo": null,
   "photo_kind": null,
   "photos": [],
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#r1790566349-ea93c6"
  },
  {
   "id": "r1790566321-cd76c1",
   "at": "2026-09-28T03:32:01Z",
   "date": "2026-09-27 20:32 Arizona time (UTC−7)",
   "job": "Black anneal test grid (stainless)",
   "workpiece": "Stainless scrap",
   "group": "stainless-steel",
   "setting_id": null,
   "setting_name": "fixed test grid",
   "params_edited": false,
   "params": null,
   "grid_summary": "5x5 black-anneal test grid: frequency 120/150/190/240/300 kHz (rows, top->bottom) x speed 200/265/330/400/500 mm/s (columns, left->right); all cells 15 % power, 200 ns Q-pulse, 0.025 mm @45 deg cross-hatch, 1 pass (MarkParam Steel/General/Anneal base)",
   "status": "pending",
   "result": null,
   "rating": null,
   "photo": null,
   "photo_kind": null,
   "photos": [],
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#r1790566321-cd76c1"
  },
  {
   "id": "r1790566310-539a57",
   "at": "2026-09-28T03:31:50Z",
   "date": "2026-09-27 20:31 Arizona time (UTC−7)",
   "job": "Black anneal test grid (stainless)",
   "workpiece": "Stainless scrap",
   "group": "stainless-steel",
   "setting_id": null,
   "setting_name": "fixed test grid",
   "params_edited": false,
   "params": null,
   "grid_summary": "5x5 black-anneal test grid: frequency 120/150/190/240/300 kHz (rows, top->bottom) x speed 200/265/330/400/500 mm/s (columns, left->right); all cells 15 % power, 200 ns Q-pulse, 0.025 mm @45 deg cross-hatch, 1 pass (MarkParam Steel/General/Anneal base)",
   "status": "pending",
   "result": null,
   "rating": null,
   "photo": null,
   "photo_kind": null,
   "photos": [],
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#r1790566310-539a57"
  },
  {
   "id": "r1790566266-cf51e0",
   "at": "2026-09-28T03:31:06Z",
   "date": "2026-09-27 20:31 Arizona time (UTC−7)",
   "job": "Black anneal test grid (stainless)",
   "workpiece": "Stainless scrap",
   "group": "stainless-steel",
   "setting_id": null,
   "setting_name": "fixed test grid",
   "params_edited": false,
   "params": null,
   "grid_summary": "5x5 black-anneal test grid: frequency 120/150/190/240/300 kHz (rows, top->bottom) x speed 200/265/330/400/500 mm/s (columns, left->right); all cells 15 % power, 200 ns Q-pulse, 0.025 mm @45 deg cross-hatch, 1 pass (MarkParam Steel/General/Anneal base)",
   "status": "pending",
   "result": null,
   "rating": null,
   "photo": null,
   "photo_kind": null,
   "photos": [],
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#r1790566266-cf51e0"
  },
  {
   "id": "r1790565525-1350ba",
   "at": "2026-09-28T03:18:45Z",
   "date": "2026-09-27 20:18 Arizona time (UTC−7)",
   "job": "Malorie / I'm sorry - deluxe card",
   "workpiece": "Black anodized aluminum business card",
   "group": "aluminum",
   "setting_id": "aluminum-catalyst-brilliance-laser-ink-v2-fast-beta",
   "setting_name": "Aluminum / Catalyst / Brilliance Laser Ink v2 - fast (beta)",
   "params_edited": false,
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 40,
    "min_power_pct": 20,
    "speed_mm_s": 1200,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "grid_summary": null,
   "status": "pending",
   "result": null,
   "rating": null,
   "photo": "https://laserview.hankelsner.tech/settings/photos/r1790565525-1350ba/p1790565776872-816810-1600.jpg",
   "photo_kind": "auto",
   "photos": [
    {
     "url": "https://laserview.hankelsner.tech/settings/photos/r1790565525-1350ba/p1790565776872-816810-1600.jpg",
     "thumbnail": "https://laserview.hankelsner.tech/settings/photos/r1790565525-1350ba/p1790565776872-816810-640.jpg",
     "type": "auto webcam snapshot",
     "stage": "end",
     "taken": "2026-09-28T03:22:54Z",
     "caption": null
    },
    {
     "url": "https://laserview.hankelsner.tech/settings/photos/r1790565525-1350ba/p1790565776833-5749da-1600.jpg",
     "thumbnail": "https://laserview.hankelsner.tech/settings/photos/r1790565525-1350ba/p1790565776833-5749da-640.jpg",
     "type": "auto webcam snapshot",
     "stage": "mid",
     "taken": "2026-09-28T03:21:05Z",
     "caption": null
    },
    {
     "url": "https://laserview.hankelsner.tech/settings/photos/r1790565525-1350ba/p1790565533729-4a7256-1600.jpg",
     "thumbnail": "https://laserview.hankelsner.tech/settings/photos/r1790565525-1350ba/p1790565533729-4a7256-640.jpg",
     "type": "auto webcam snapshot",
     "stage": "start",
     "taken": "2026-09-28T03:18:52Z",
     "caption": null
    }
   ],
   "url": "https://laserview.hankelsner.tech/settings/aluminum/#r1790565525-1350ba"
  },
  {
   "id": "r1790564439-e55cef",
   "at": "2026-09-28T03:00:39Z",
   "date": "2026-09-27 20:00 Arizona time (UTC−7)",
   "job": "Malorie / I'm sorry - deluxe card",
   "workpiece": "Black anodized aluminum business card",
   "group": "aluminum",
   "setting_id": "aluminum-catalyst-brilliance-laser-ink",
   "setting_name": "Aluminum / Catalyst / Brilliance Laser Ink",
   "params_edited": false,
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 16,
    "min_power_pct": 12,
    "speed_mm_s": 110,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "grid_summary": null,
   "status": "pending",
   "result": null,
   "rating": null,
   "photo": "https://laserview.hankelsner.tech/settings/photos/r1790564439-e55cef/p1790564453371-522efb-1600.jpg",
   "photo_kind": "auto",
   "photos": [
    {
     "url": "https://laserview.hankelsner.tech/settings/photos/r1790564439-e55cef/p1790564453371-522efb-1600.jpg",
     "thumbnail": "https://laserview.hankelsner.tech/settings/photos/r1790564439-e55cef/p1790564453371-522efb-640.jpg",
     "type": "auto webcam snapshot",
     "stage": "end",
     "taken": "2026-09-28T03:00:53Z",
     "caption": null
    },
    {
     "url": "https://laserview.hankelsner.tech/settings/photos/r1790564439-e55cef/p1790564447366-31cb12-1600.jpg",
     "thumbnail": "https://laserview.hankelsner.tech/settings/photos/r1790564439-e55cef/p1790564447366-31cb12-640.jpg",
     "type": "auto webcam snapshot",
     "stage": "start",
     "taken": "2026-09-28T03:00:46Z",
     "caption": null
    }
   ],
   "url": "https://laserview.hankelsner.tech/settings/aluminum/#r1790564439-e55cef"
  },
  {
   "id": "r1790555608-5d8192",
   "at": "2026-09-28T00:33:28Z",
   "date": "2026-09-27 17:33 Arizona time (UTC−7)",
   "job": "Malorie / I'm sorry",
   "workpiece": "Stainless steel (electrical box cover)",
   "group": "stainless-steel",
   "setting_id": "steel-general-anneal",
   "setting_name": "Steel / General / Anneal",
   "params_edited": false,
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 15,
    "min_power_pct": 7,
    "speed_mm_s": 330,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "grid_summary": null,
   "status": "pending",
   "result": null,
   "rating": null,
   "photo": null,
   "photo_kind": null,
   "photos": [],
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#r1790555608-5d8192"
  }
 ],
 "settings": [
  {
   "id": "aluminum-catalyst-brilliance-laser-ink",
   "name": "Aluminum / Catalyst / Brilliance Laser Ink",
   "material": "Aluminum",
   "group": "aluminum",
   "operation": "Brilliance Laser Ink",
   "status": "verified",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 16,
    "min_power_pct": 12,
    "speed_mm_s": 110,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [
    "r1790562881-507d91"
   ],
   "runs_pending": [
    "r1790564439-e55cef"
   ],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/aluminum/#aluminum-catalyst-brilliance-laser-ink"
  },
  {
   "id": "stainless-dark-brown-malorie-run-1",
   "name": "Stainless - dark brown (Malorie run 1)",
   "material": "Stainless steel",
   "group": "stainless-steel",
   "operation": "Dark brown",
   "status": "verified",
   "source": "Saved preset (derived from library entry Aluminum / General / Engrave)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 40,
    "min_power_pct": 40,
    "speed_mm_s": 1000,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the job file; LightBurn's default pulse width applied (logged as 200 ns)."
   },
   "runs_verified": [
    "r1790555087-run1"
   ],
   "runs_pending": [],
   "created": "2026-09-28T00:31:00Z",
   "updated": "2026-09-28T00:31:00Z",
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#stainless-dark-brown-malorie-run-1"
  },
  {
   "id": "aluminum-catalyst-brilliance-laser-ink-v2-fast-beta",
   "name": "Aluminum / Catalyst / Brilliance Laser Ink v2 - fast (beta)",
   "material": "Aluminum",
   "group": "aluminum",
   "operation": "Brilliance Laser Ink v2 - fast (beta)",
   "status": "saved",
   "source": "Saved preset (derived from library entry Aluminum / Catalyst / Brilliance Laser Ink)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 40,
    "min_power_pct": 20,
    "speed_mm_s": 1200,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "runs_verified": [],
   "runs_pending": [
    "r1790565525-1350ba"
   ],
   "created": "2026-09-28T03:11:47Z",
   "updated": "2026-09-28T03:11:47Z",
   "url": "https://laserview.hankelsner.tech/settings/aluminum/#aluminum-catalyst-brilliance-laser-ink-v2-fast-beta"
  },
  {
   "id": "stainless-black-anneal",
   "name": "Stainless - black anneal",
   "material": "Stainless steel",
   "group": "stainless-steel",
   "operation": "Black anneal",
   "status": "saved",
   "source": "Saved preset (derived from library entry Steel / General / Anneal)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 15,
    "min_power_pct": 7,
    "speed_mm_s": 330,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:31:00Z",
   "updated": "2026-09-28T00:31:00Z",
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#stainless-black-anneal"
  },
  {
   "id": "aluminum-cut-cut",
   "name": "Aluminum / Cut / Cut",
   "material": "Aluminum",
   "group": "aluminum",
   "operation": "Cut",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Line (Cut)",
    "power_pct": 45,
    "min_power_pct": 12,
    "speed_mm_s": 2500,
    "frequency_khz": 37,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/aluminum/#aluminum-cut-cut"
  },
  {
   "id": "aluminum-general-dark",
   "name": "Aluminum / General / Dark",
   "material": "Aluminum",
   "group": "aluminum",
   "operation": "Dark",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 45,
    "min_power_pct": 40,
    "speed_mm_s": 1500,
    "frequency_khz": 45,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.002,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/aluminum/#aluminum-general-dark"
  },
  {
   "id": "aluminum-general-engrave",
   "name": "Aluminum / General / Engrave",
   "material": "Aluminum",
   "group": "aluminum",
   "operation": "Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 40,
    "min_power_pct": 40,
    "speed_mm_s": 1000,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/aluminum/#aluminum-general-engrave"
  },
  {
   "id": "aluminum-general-white-finish",
   "name": "Aluminum / General / White Finish",
   "material": "Aluminum",
   "group": "aluminum",
   "operation": "White Finish",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 12,
    "speed_mm_s": 750,
    "frequency_khz": 45,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/aluminum/#aluminum-general-white-finish"
  },
  {
   "id": "brass-general-black-deep",
   "name": "Brass / General / Black Deep",
   "material": "Brass",
   "group": "brass",
   "operation": "Black Deep",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 45,
    "min_power_pct": 12,
    "speed_mm_s": 120,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/brass/#brass-general-black-deep"
  },
  {
   "id": "brass-general-engrave",
   "name": "Brass / General / Engrave",
   "material": "Brass",
   "group": "brass",
   "operation": "Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 25,
    "min_power_pct": 12,
    "speed_mm_s": 1500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/brass/#brass-general-engrave"
  },
  {
   "id": "brass-raster-photo-details",
   "name": "Brass / Raster / Photo Details",
   "material": "Brass",
   "group": "brass",
   "operation": "Photo Details",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 45,
    "min_power_pct": 9,
    "speed_mm_s": 250,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/brass/#brass-raster-photo-details"
  },
  {
   "id": "copper-general-engrave",
   "name": "Copper / General / Engrave",
   "material": "Copper",
   "group": "copper",
   "operation": "Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 45,
    "min_power_pct": 12,
    "speed_mm_s": 120,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/copper/#copper-general-engrave"
  },
  {
   "id": "electro-plating-general-engrave",
   "name": "Electro Plating / General / Engrave",
   "material": "Electro Plating",
   "group": "coatings",
   "operation": "Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 40,
    "min_power_pct": 12,
    "speed_mm_s": 1000,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/coatings/#electro-plating-general-engrave"
  },
  {
   "id": "experimental-abs-black",
   "name": "Experimental / ABS / Black",
   "material": "Experimental",
   "group": "plastics",
   "operation": "Black",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 20,
    "min_power_pct": 7,
    "speed_mm_s": 3800,
    "frequency_khz": 200,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#experimental-abs-black"
  },
  {
   "id": "experimental-abs-general",
   "name": "Experimental / ABS / General",
   "material": "Experimental",
   "group": "plastics",
   "operation": "General",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 10,
    "min_power_pct": 7,
    "speed_mm_s": 5000,
    "frequency_khz": null,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#experimental-abs-general"
  },
  {
   "id": "experimental-abs-white",
   "name": "Experimental / ABS / White",
   "material": "Experimental",
   "group": "plastics",
   "operation": "White",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 10,
    "min_power_pct": 7,
    "speed_mm_s": 1500,
    "frequency_khz": 90,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#experimental-abs-white"
  },
  {
   "id": "experimental-browning-firearm-composite-mark",
   "name": "Experimental / Browning Firearm Composite / Mark",
   "material": "Experimental",
   "group": "plastics",
   "operation": "Mark",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 10,
    "min_power_pct": 5,
    "speed_mm_s": 3050,
    "frequency_khz": 90,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#experimental-browning-firearm-composite-mark"
  },
  {
   "id": "experimental-cerkote-remove-1-layer",
   "name": "Experimental / Cerkote / Remove 1 Layer",
   "material": "Experimental",
   "group": "coatings",
   "operation": "Remove 1 Layer",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 30,
    "min_power_pct": 6,
    "speed_mm_s": 355,
    "frequency_khz": 45,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/coatings/#experimental-cerkote-remove-1-layer"
  },
  {
   "id": "experimental-cpvc-danger-white",
   "name": "Experimental / CPVC (DANGER) / White",
   "material": "Experimental",
   "group": "plastics",
   "operation": "White",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 9,
    "min_power_pct": 6,
    "speed_mm_s": 1800,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#experimental-cpvc-danger-white"
  },
  {
   "id": "experimental-delrin-black-tan",
   "name": "Experimental / Delrin Black / Tan",
   "material": "Experimental",
   "group": "plastics",
   "operation": "Tan",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 6,
    "min_power_pct": 6,
    "speed_mm_s": 1500,
    "frequency_khz": null,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#experimental-delrin-black-tan"
  },
  {
   "id": "experimental-glass-steel-backed-gray",
   "name": "Experimental / Glass (Steel Backed) / Gray",
   "material": "Experimental",
   "group": "glass",
   "operation": "Gray",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 45,
    "min_power_pct": 6,
    "speed_mm_s": 1000,
    "frequency_khz": null,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": true,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/glass/#experimental-glass-steel-backed-gray"
  },
  {
   "id": "experimental-glock-polymer-engrave",
   "name": "Experimental / Glock Polymer / Engrave",
   "material": "Experimental",
   "group": "plastics",
   "operation": "Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 15,
    "min_power_pct": 6,
    "speed_mm_s": 2000,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#experimental-glock-polymer-engrave"
  },
  {
   "id": "experimental-glock-polymer-stipple",
   "name": "Experimental / Glock Polymer / Stipple",
   "material": "Experimental",
   "group": "plastics",
   "operation": "Stipple",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 20,
    "min_power_pct": 6,
    "speed_mm_s": 3000,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#experimental-glock-polymer-stipple"
  },
  {
   "id": "experimental-golf-ball-mark",
   "name": "Experimental / Golf Ball / Mark",
   "material": "Experimental",
   "group": "plastics",
   "operation": "Mark",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 8,
    "min_power_pct": 5,
    "speed_mm_s": 1750,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#experimental-golf-ball-mark"
  },
  {
   "id": "experimental-kydex-general",
   "name": "Experimental / Kydex / General",
   "material": "Experimental",
   "group": "plastics",
   "operation": "General",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 9,
    "min_power_pct": 6,
    "speed_mm_s": 1800,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#experimental-kydex-general"
  },
  {
   "id": "experimental-pewter-gray",
   "name": "Experimental / Pewter / Gray",
   "material": "Experimental",
   "group": "tin-pewter",
   "operation": "Gray",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 5,
    "min_power_pct": 5,
    "speed_mm_s": 220,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/tin-pewter/#experimental-pewter-gray"
  },
  {
   "id": "experimental-pewter-silver",
   "name": "Experimental / Pewter / Silver",
   "material": "Experimental",
   "group": "tin-pewter",
   "operation": "Silver",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 5,
    "min_power_pct": 5,
    "speed_mm_s": 330,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/tin-pewter/#experimental-pewter-silver"
  },
  {
   "id": "experimental-rock-and-stone-engrave",
   "name": "Experimental / Rock and Stone / Engrave",
   "material": "Experimental",
   "group": "stone",
   "operation": "Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 35,
    "min_power_pct": 5,
    "speed_mm_s": 2500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stone/#experimental-rock-and-stone-engrave"
  },
  {
   "id": "experimental-tin-engrave",
   "name": "Experimental / Tin / Engrave",
   "material": "Experimental",
   "group": "tin-pewter",
   "operation": "Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 25,
    "min_power_pct": 6,
    "speed_mm_s": 1000,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/tin-pewter/#experimental-tin-engrave"
  },
  {
   "id": "gold-10-14k-cut-cut",
   "name": "Gold / 10-14K Cut / Cut",
   "material": "Gold",
   "group": "gold",
   "operation": "Cut",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Line (Cut)",
    "power_pct": 45,
    "min_power_pct": 7,
    "speed_mm_s": 100,
    "frequency_khz": 37,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.002,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-10-14k-cut-cut"
  },
  {
   "id": "gold-10-14k-y-r-photo-1-base",
   "name": "Gold / 10-14K Y/R Photo / 1 Base",
   "material": "Gold",
   "group": "gold",
   "operation": "1 Base",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 20,
    "min_power_pct": 9,
    "speed_mm_s": 500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-10-14k-y-r-photo-1-base"
  },
  {
   "id": "gold-10-14k-y-r-photo-2-cleanup",
   "name": "Gold / 10-14K Y/R Photo / 2 Cleanup",
   "material": "Gold",
   "group": "gold",
   "operation": "2 Cleanup",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 12,
    "min_power_pct": 9,
    "speed_mm_s": 750,
    "frequency_khz": 45,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-10-14k-y-r-photo-2-cleanup"
  },
  {
   "id": "gold-10-14k-y-r-photo-3-details",
   "name": "Gold / 10-14K Y/R Photo / 3 Details",
   "material": "Gold",
   "group": "gold",
   "operation": "3 Details",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 12,
    "min_power_pct": 9,
    "speed_mm_s": 750,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-10-14k-y-r-photo-3-details"
  },
  {
   "id": "gold-10-14k-yellow-base",
   "name": "Gold / 10-14K Yellow / Base",
   "material": "Gold",
   "group": "gold",
   "operation": "Base",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 20,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-10-14k-yellow-base"
  },
  {
   "id": "gold-10-14k-yellow-bright",
   "name": "Gold / 10-14K Yellow / Bright",
   "material": "Gold",
   "group": "gold",
   "operation": "Bright",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 25,
    "min_power_pct": 7,
    "speed_mm_s": 2500,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-10-14k-yellow-bright"
  },
  {
   "id": "gold-10-14k-yellow-cleanup",
   "name": "Gold / 10-14K Yellow / Cleanup",
   "material": "Gold",
   "group": "gold",
   "operation": "Cleanup",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 45,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-10-14k-yellow-cleanup"
  },
  {
   "id": "gold-10-14k-yellow-dark-to-001",
   "name": "Gold / 10-14K Yellow / Dark (to .001)",
   "material": "Gold",
   "group": "gold",
   "operation": "Dark (to .001)",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.002,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-10-14k-yellow-dark-to-001"
  },
  {
   "id": "gold-10-14k-yellow-medium-to-001",
   "name": "Gold / 10-14K Yellow / Medium (to .001)",
   "material": "Gold",
   "group": "gold",
   "operation": "Medium (to .001)",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 200,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.002,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-10-14k-yellow-medium-to-001"
  },
  {
   "id": "gold-14k-rose-base",
   "name": "Gold / 14K Rose / Base",
   "material": "Gold",
   "group": "gold",
   "operation": "Base",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 20,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-rose-base"
  },
  {
   "id": "gold-14k-rose-bright",
   "name": "Gold / 14K Rose / Bright",
   "material": "Gold",
   "group": "gold",
   "operation": "Bright",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 25,
    "min_power_pct": 7,
    "speed_mm_s": 2500,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-rose-bright"
  },
  {
   "id": "gold-14k-rose-cleanup",
   "name": "Gold / 14K Rose / Cleanup",
   "material": "Gold",
   "group": "gold",
   "operation": "Cleanup",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 45,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-rose-cleanup"
  },
  {
   "id": "gold-14k-rose-dark-to-001",
   "name": "Gold / 14K Rose / Dark (to .001)",
   "material": "Gold",
   "group": "gold",
   "operation": "Dark (to .001)",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.002,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-rose-dark-to-001"
  },
  {
   "id": "gold-14k-rose-medium-to-001",
   "name": "Gold / 14K Rose / Medium (to .001)",
   "material": "Gold",
   "group": "gold",
   "operation": "Medium (to .001)",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 200,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.002,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-rose-medium-to-001"
  },
  {
   "id": "gold-14k-white-anneal-white",
   "name": "Gold / 14K White / Anneal White",
   "material": "Gold",
   "group": "gold",
   "operation": "Anneal White",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 25,
    "min_power_pct": 7,
    "speed_mm_s": 2500,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-white-anneal-white"
  },
  {
   "id": "gold-14k-white-base",
   "name": "Gold / 14K White / Base",
   "material": "Gold",
   "group": "gold",
   "operation": "Base",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 20,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-white-base"
  },
  {
   "id": "gold-14k-white-black-to-001",
   "name": "Gold / 14K White / Black (to .001)",
   "material": "Gold",
   "group": "gold",
   "operation": "Black (to .001)",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.002,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-white-black-to-001"
  },
  {
   "id": "gold-14k-white-cleanup",
   "name": "Gold / 14K White / Cleanup",
   "material": "Gold",
   "group": "gold",
   "operation": "Cleanup",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 45,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-white-cleanup"
  },
  {
   "id": "gold-14k-white-gold-sparkle-to-001",
   "name": "Gold / 14K White / Gold Sparkle (to .001)",
   "material": "Gold",
   "group": "gold",
   "operation": "Gold Sparkle (to .001)",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 200,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.002,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-white-gold-sparkle-to-001"
  },
  {
   "id": "gold-14k-white-photo-1-base",
   "name": "Gold / 14K White Photo / 1 Base",
   "material": "Gold",
   "group": "gold",
   "operation": "1 Base",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 20,
    "min_power_pct": 9,
    "speed_mm_s": 500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-white-photo-1-base"
  },
  {
   "id": "gold-14k-white-photo-2-white",
   "name": "Gold / 14K White Photo / 2 White",
   "material": "Gold",
   "group": "gold",
   "operation": "2 White",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 25,
    "min_power_pct": 9,
    "speed_mm_s": 2500,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-white-photo-2-white"
  },
  {
   "id": "gold-14k-white-photo-3-details",
   "name": "Gold / 14K White Photo / 3 Details",
   "material": "Gold",
   "group": "gold",
   "operation": "3 Details",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 12,
    "min_power_pct": 9,
    "speed_mm_s": 750,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/gold/#gold-14k-white-photo-3-details"
  },
  {
   "id": "granite-black-gray",
   "name": "Granite / Black / Gray",
   "material": "Granite",
   "group": "stone",
   "operation": "Gray",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 40,
    "min_power_pct": 7,
    "speed_mm_s": 1000,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stone/#granite-black-gray"
  },
  {
   "id": "leather-low-khz-general",
   "name": "Leather / Low KHZ / General",
   "material": "Leather",
   "group": "leather",
   "operation": "General",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 15,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/leather/#leather-low-khz-general"
  },
  {
   "id": "leather-low-khz-gentle",
   "name": "Leather / Low KHZ / Gentle",
   "material": "Leather",
   "group": "leather",
   "operation": "Gentle",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/leather/#leather-low-khz-gentle"
  },
  {
   "id": "leather-low-khz-resistant",
   "name": "Leather / Low KHZ / Resistant",
   "material": "Leather",
   "group": "leather",
   "operation": "Resistant",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 20,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/leather/#leather-low-khz-resistant"
  },
  {
   "id": "leather-standard-large-projects",
   "name": "Leather / Standard / *Large Projects",
   "material": "Leather",
   "group": "leather",
   "operation": "*Large Projects",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 30,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 200,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/leather/#leather-standard-large-projects"
  },
  {
   "id": "leather-standard-general",
   "name": "Leather / Standard / General",
   "material": "Leather",
   "group": "leather",
   "operation": "General",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 15,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 200,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/leather/#leather-standard-general"
  },
  {
   "id": "leather-standard-gentle",
   "name": "Leather / Standard / Gentle",
   "material": "Leather",
   "group": "leather",
   "operation": "Gentle",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 200,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/leather/#leather-standard-gentle"
  },
  {
   "id": "leather-standard-resistant",
   "name": "Leather / Standard / Resistant",
   "material": "Leather",
   "group": "leather",
   "operation": "Resistant",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 20,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 200,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/leather/#leather-standard-resistant"
  },
  {
   "id": "pmag-general-brown",
   "name": "PMAG / General / Brown",
   "material": "PMAG",
   "group": "plastics",
   "operation": "Brown",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 50,
    "min_power_pct": null,
    "speed_mm_s": 2000,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": null,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": true,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#pmag-general-brown"
  },
  {
   "id": "pmag-general-gray-to-6000",
   "name": "PMAG / General / Gray (to 6000)",
   "material": "PMAG",
   "group": "plastics",
   "operation": "Gray (to 6000)",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 7,
    "min_power_pct": 7,
    "speed_mm_s": 5000,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.08,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": true,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#pmag-general-gray-to-6000"
  },
  {
   "id": "pmag-general-tan-to-7500",
   "name": "PMAG / General / Tan (to 7500)",
   "material": "PMAG",
   "group": "plastics",
   "operation": "Tan (to 7500)",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 20,
    "min_power_pct": null,
    "speed_mm_s": 5000,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.05,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 2,
    "flood_fill": true,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#pmag-general-tan-to-7500"
  },
  {
   "id": "polyester-cut-thin-sheet",
   "name": "Polyester / Cut / Thin Sheet",
   "material": "Polyester",
   "group": "plastics",
   "operation": "Thin Sheet",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Line (Cut)",
    "power_pct": 40,
    "min_power_pct": 7,
    "speed_mm_s": 1000,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.08,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": true,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/plastics/#polyester-cut-thin-sheet"
  },
  {
   "id": "powder-coat-general-project-removal-multi-pass-required",
   "name": "Powder Coat / General / Project Removal (Multi-pass Required)",
   "material": "Powder Coat",
   "group": "coatings",
   "operation": "Project Removal (Multi-pass Required)",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 25,
    "min_power_pct": 7,
    "speed_mm_s": 1000,
    "frequency_khz": 150,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/coatings/#powder-coat-general-project-removal-multi-pass-required"
  },
  {
   "id": "powder-coat-general-rotary-removal",
   "name": "Powder Coat / General / Rotary Removal",
   "material": "Powder Coat",
   "group": "coatings",
   "operation": "Rotary Removal",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 30,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 80,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.02,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/coatings/#powder-coat-general-rotary-removal"
  },
  {
   "id": "powder-coat-photo-heavy-coat-photo",
   "name": "Powder Coat / Photo / Heavy Coat Photo",
   "material": "Powder Coat",
   "group": "coatings",
   "operation": "Heavy Coat Photo",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 45,
    "min_power_pct": 9,
    "speed_mm_s": 500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/coatings/#powder-coat-photo-heavy-coat-photo"
  },
  {
   "id": "printer-paper-none-cuts-paper-no-burn",
   "name": "printer paper / None / cuts paper, no burn",
   "material": "printer paper",
   "group": "paper",
   "operation": "cuts paper, no burn",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Line (Cut)",
    "power_pct": 100,
    "min_power_pct": null,
    "speed_mm_s": 25,
    "frequency_khz": 80,
    "pulse_width_ns": 500,
    "hatch_spacing_mm": null,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/paper/#printer-paper-none-cuts-paper-no-burn"
  },
  {
   "id": "printer-paper-none-perforated-paper",
   "name": "printer paper / None / perforated paper",
   "material": "printer paper",
   "group": "paper",
   "operation": "perforated paper",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Line (Cut)",
    "power_pct": 100,
    "min_power_pct": null,
    "speed_mm_s": 50,
    "frequency_khz": 80,
    "pulse_width_ns": 500,
    "hatch_spacing_mm": null,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/paper/#printer-paper-none-perforated-paper"
  },
  {
   "id": "silver-general-dark-deep",
   "name": "Silver / General / Dark Deep",
   "material": "Silver",
   "group": "silver",
   "operation": "Dark Deep",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 30,
    "min_power_pct": 7,
    "speed_mm_s": 300,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/silver/#silver-general-dark-deep"
  },
  {
   "id": "silver-general-engrave",
   "name": "Silver / General / Engrave",
   "material": "Silver",
   "group": "silver",
   "operation": "Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 17,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/silver/#silver-general-engrave"
  },
  {
   "id": "silver-general-satin-finish",
   "name": "Silver / General / Satin Finish",
   "material": "Silver",
   "group": "silver",
   "operation": "Satin Finish",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 45,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/silver/#silver-general-satin-finish"
  },
  {
   "id": "silver-photo-1-base",
   "name": "Silver / Photo / 1 Base",
   "material": "Silver",
   "group": "silver",
   "operation": "1 Base",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 45,
    "min_power_pct": 9,
    "speed_mm_s": 100,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/silver/#silver-photo-1-base"
  },
  {
   "id": "silver-photo-2-white",
   "name": "Silver / Photo / 2 White",
   "material": "Silver",
   "group": "silver",
   "operation": "2 White",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 12,
    "min_power_pct": 9,
    "speed_mm_s": 750,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/silver/#silver-photo-2-white"
  },
  {
   "id": "silver-photo-3-details",
   "name": "Silver / Photo / 3 Details",
   "material": "Silver",
   "group": "silver",
   "operation": "3 Details",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Image (raster)",
    "power_pct": 45,
    "min_power_pct": 9,
    "speed_mm_s": 150,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/silver/#silver-photo-3-details"
  },
  {
   "id": "slate-general-light-gray",
   "name": "Slate / General / Light Gray",
   "material": "Slate",
   "group": "stone",
   "operation": "Light Gray",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 40,
    "min_power_pct": 7,
    "speed_mm_s": 1000,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stone/#slate-general-light-gray"
  },
  {
   "id": "slate-general-tan",
   "name": "Slate / General / Tan",
   "material": "Slate",
   "group": "stone",
   "operation": "Tan",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 45,
    "min_power_pct": 7,
    "speed_mm_s": 150,
    "frequency_khz": 45,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stone/#slate-general-tan"
  },
  {
   "id": "slate-general-white",
   "name": "Slate / General / White",
   "material": "Slate",
   "group": "stone",
   "operation": "White",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 40,
    "min_power_pct": 7,
    "speed_mm_s": 1000,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stone/#slate-general-white"
  },
  {
   "id": "stainless-coin-backround-stainless-coin-stainless-coin-backr",
   "name": "stainless coin backround / stainless coin / stainless coin backround",
   "material": "stainless coin backround",
   "group": "stainless-steel",
   "operation": "stainless coin backround",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 75,
    "min_power_pct": null,
    "speed_mm_s": 1200,
    "frequency_khz": 30,
    "pulse_width_ns": 100,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#stainless-coin-backround-stainless-coin-stainless-coin-backr"
  },
  {
   "id": "stainless-coin-lettes-stainless-coin-stainless-coin",
   "name": "stainless coin lettes / stainless coin / stainless coin",
   "material": "stainless coin lettes",
   "group": "stainless-steel",
   "operation": "stainless coin",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 75,
    "min_power_pct": null,
    "speed_mm_s": 1200,
    "frequency_khz": 30,
    "pulse_width_ns": 100,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#stainless-coin-lettes-stainless-coin-stainless-coin"
  },
  {
   "id": "stainless-coin-lettes-stainless-coin-stainless-coin-fill-bla",
   "name": "stainless coin lettes / stainless coin / stainless coin fill black",
   "material": "stainless coin lettes",
   "group": "stainless-steel",
   "operation": "stainless coin fill black",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 100,
    "min_power_pct": null,
    "speed_mm_s": 650,
    "frequency_khz": null,
    "pulse_width_ns": 100,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 45,
    "passes": 3,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#stainless-coin-lettes-stainless-coin-stainless-coin-fill-bla"
  },
  {
   "id": "stainless-coin-lettes-stainless-coin-stainless-coin-fill-dee",
   "name": "stainless coin lettes / stainless coin / stainless coin fill deep black",
   "material": "stainless coin lettes",
   "group": "stainless-steel",
   "operation": "stainless coin fill deep black",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 75,
    "min_power_pct": null,
    "speed_mm_s": 300,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 90,
    "passes": 2,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#stainless-coin-lettes-stainless-coin-stainless-coin-fill-dee"
  },
  {
   "id": "stainless-coin-lettes-stainless-coin-stainless-coin-fill-gol",
   "name": "stainless coin lettes / stainless coin / stainless coin fill gold",
   "material": "stainless coin lettes",
   "group": "stainless-steel",
   "operation": "stainless coin fill gold",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 100,
    "min_power_pct": null,
    "speed_mm_s": 1200,
    "frequency_khz": 30,
    "pulse_width_ns": 100,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 45,
    "passes": 3,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#stainless-coin-lettes-stainless-coin-stainless-coin-fill-gol"
  },
  {
   "id": "stainless-coin-lettes-stainless-coin-stainless-coin-line",
   "name": "stainless coin lettes / stainless coin / stainless coin line",
   "material": "stainless coin lettes",
   "group": "stainless-steel",
   "operation": "stainless coin line",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Line (Cut)",
    "power_pct": 50,
    "min_power_pct": null,
    "speed_mm_s": 2500,
    "frequency_khz": 80,
    "pulse_width_ns": 500,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 5,
    "flood_fill": false,
    "field_mm": "126 x 126"
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/stainless-steel/#stainless-coin-lettes-stainless-coin-stainless-coin-line"
  },
  {
   "id": "steel-general-anneal",
   "name": "Steel / General / Anneal",
   "material": "Steel",
   "group": "steel",
   "operation": "Anneal",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 15,
    "min_power_pct": 7,
    "speed_mm_s": 330,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [
    "r1790555608-5d8192"
   ],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/steel/#steel-general-anneal"
  },
  {
   "id": "steel-general-deep-engrave",
   "name": "Steel / General / Deep Engrave",
   "material": "Steel",
   "group": "steel",
   "operation": "Deep Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 45,
    "min_power_pct": 7,
    "speed_mm_s": 1900,
    "frequency_khz": 37,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.01,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": true,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/steel/#steel-general-deep-engrave"
  },
  {
   "id": "steel-general-engrave",
   "name": "Steel / General / Engrave",
   "material": "Steel",
   "group": "steel",
   "operation": "Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 45,
    "min_power_pct": 7,
    "speed_mm_s": 500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/steel/#steel-general-engrave"
  },
  {
   "id": "steel-general-white-finish",
   "name": "Steel / General / White Finish",
   "material": "Steel",
   "group": "steel",
   "operation": "White Finish",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 12,
    "min_power_pct": 7,
    "speed_mm_s": 750,
    "frequency_khz": 45,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/steel/#steel-general-white-finish"
  },
  {
   "id": "steel-general-z-mark-black",
   "name": "Steel / General / Z-Mark Black",
   "material": "Steel",
   "group": "steel",
   "operation": "Z-Mark Black",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 17,
    "min_power_pct": 7,
    "speed_mm_s": 50,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/steel/#steel-general-z-mark-black"
  },
  {
   "id": "steel-rust-removal-steel-rust-removal",
   "name": "steel / rust removal / steel rust removal",
   "material": "steel",
   "group": "steel",
   "operation": "steel rust removal",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 100,
    "min_power_pct": null,
    "speed_mm_s": 2000,
    "frequency_khz": 80,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.03,
    "hatch_angle_deg": 45,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/steel/#steel-rust-removal-steel-rust-removal"
  },
  {
   "id": "titanium-general-anneal-gold",
   "name": "Titanium / General / Anneal Gold",
   "material": "Titanium",
   "group": "titanium",
   "operation": "Anneal Gold",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 15,
    "min_power_pct": 7,
    "speed_mm_s": 330,
    "frequency_khz": 190,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/titanium/#titanium-general-anneal-gold"
  },
  {
   "id": "titanium-general-engrave",
   "name": "Titanium / General / Engrave",
   "material": "Titanium",
   "group": "titanium",
   "operation": "Engrave",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 35,
    "min_power_pct": 7,
    "speed_mm_s": 1300,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/titanium/#titanium-general-engrave"
  },
  {
   "id": "titanium-general-z-mark-black",
   "name": "Titanium / General / Z-Mark Black",
   "material": "Titanium",
   "group": "titanium",
   "operation": "Z-Mark Black",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 25,
    "min_power_pct": 7,
    "speed_mm_s": 250,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/titanium/#titanium-general-z-mark-black"
  },
  {
   "id": "wood-pine-black",
   "name": "Wood / Pine / Black",
   "material": "Wood",
   "group": "wood",
   "operation": "Black",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 20,
    "min_power_pct": 7,
    "speed_mm_s": 35,
    "frequency_khz": 50,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.2,
    "hatch_angle_deg": null,
    "cross_hatch": false,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/wood/#wood-pine-black"
  },
  {
   "id": "zinc-general-core-darken",
   "name": "Zinc / General / Core Darken",
   "material": "Zinc",
   "group": "zinc",
   "operation": "Core Darken",
   "status": "library",
   "source": "LightBurn library (MarkParam.clb)",
   "params": {
    "mode": "Fill (Scan)",
    "power_pct": 40,
    "min_power_pct": 12,
    "speed_mm_s": 500,
    "frequency_khz": 25,
    "pulse_width_ns": 200,
    "hatch_spacing_mm": 0.025,
    "hatch_angle_deg": 45,
    "cross_hatch": true,
    "bidirectional": false,
    "angle_increment_per_pass_deg": 0,
    "passes": 1,
    "flood_fill": false,
    "field_mm": "126 x 126",
    "pulse_width_note": "Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns)."
   },
   "runs_verified": [],
   "runs_pending": [],
   "created": "2026-09-28T00:20:15Z",
   "updated": "2026-09-28T00:20:15Z",
   "url": "https://laserview.hankelsner.tech/settings/zinc/#zinc-general-core-darken"
  }
 ]
}