Laser View — live cam · Settings index · ComMarker B4 60W MOPA fiber laser

ComMarker B4 60W MOPA coatings settings for LightBurn

5 LightBurn settings for coatings on a ComMarker B4 60W MOPA fiber laser. Every value below is copied from this machine's LightBurn library or run log — nothing is estimated.

Coatings settings

Electro Plating / General / Engrave

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Engrave · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	40 % (min power 12 %)
Speed	1000 mm/s
Frequency	25 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Experimental / Cerkote / Remove 1 Layer

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Remove 1 Layer · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	30 % (min power 6 %)
Speed	355 mm/s
Frequency	45 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.01 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Powder Coat / General / Project Removal (Multi-pass Required)

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Project Removal (Multi-pass Required) · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	25 % (min power 7 %)
Speed	1000 mm/s
Frequency	150 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	not set · cross-hatch off · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Powder Coat / General / Rotary Removal

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Rotary Removal · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	30 % (min power 7 %)
Speed	750 mm/s
Frequency	80 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.02 mm
Hatch angle	not set · cross-hatch off · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Powder Coat / Photo / Heavy Coat Photo

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Heavy Coat Photo · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Image (raster)
Power	45 % (min power 9 %)
Speed	500 mm/s
Frequency	25 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	not set · cross-hatch off · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Other materials

Stainless Steel · Aluminum · Titanium · Brass · Copper · Zinc · Tin & Pewter · Gold · Silver · Glass · Steel · Plastics & Polymers · Leather · Wood · Stone (Granite, Slate) · Paper