1 LightBurn setting for wood on a ComMarker B4 60W MOPA fiber laser. Every value below is copied from this machine's LightBurn library or run log — nothing is estimated.
VERIFIED RUNSAVED PRESET — NOT YET VERIFIEDSTARTING SETTING FROM LIBRARY — NOT YET VERIFIED
Wood settings
Wood / Pine / Black
STARTING SETTING FROM LIBRARY — NOT YET VERIFIED
Operation: Black · Source: LightBurn library (MarkParam.clb)
Starting setting from the LightBurn library, not yet verified on this machine.
Mode
Fill (Scan)
Power
20 % (min power 7 %)
Speed
35 mm/s
Frequency
50 kHz
Pulse width (MOPA)
200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval
0.2 mm
Hatch angle
not set · cross-hatch off · bidirectional off
Passes
1
Lens / field
126 × 126 mm field (lens focal length not recorded)