Laser View — live cam · Settings index · ComMarker B4 60W MOPA fiber laser

ComMarker B4 60W MOPA silver settings for LightBurn

6 LightBurn settings for silver on a ComMarker B4 60W MOPA fiber laser. Every value below is copied from this machine's LightBurn library or run log — nothing is estimated.

Silver settings

Silver / General / Dark Deep

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Dark Deep · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	30 % (min power 7 %)
Speed	300 mm/s
Frequency	25 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Silver / General / Engrave

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Engrave · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	17 % (min power 7 %)
Speed	500 mm/s
Frequency	25 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Silver / General / Satin Finish

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Satin Finish · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	12 % (min power 7 %)
Speed	750 mm/s
Frequency	45 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Silver / Photo / 1 Base

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: 1 Base · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Image (raster)
Power	45 % (min power 9 %)
Speed	100 mm/s
Frequency	25 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	not set · cross-hatch off · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Silver / Photo / 2 White

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: 2 White · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Image (raster)
Power	12 % (min power 9 %)
Speed	750 mm/s
Frequency	50 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	not set · cross-hatch off · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Silver / Photo / 3 Details

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: 3 Details · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Image (raster)
Power	45 % (min power 9 %)
Speed	150 mm/s
Frequency	25 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	not set · cross-hatch off · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Other materials

Stainless Steel · Aluminum · Titanium · Brass · Copper · Zinc · Tin & Pewter · Gold · Glass · Coatings (Powder Coat, Cerakote, Plating) · Steel · Plastics & Polymers · Leather · Wood · Stone (Granite, Slate) · Paper