ComMarker B4 60W MOPA paper settings for LightBurn
2 LightBurn settings for paper on a ComMarker B4 60W MOPA fiber laser. Every value below is copied from this machine's LightBurn library or run log — nothing is estimated.
VERIFIED RUNSAVED PRESET — NOT YET VERIFIEDSTARTING SETTING FROM LIBRARY — NOT YET VERIFIED
Paper settings
printer paper / None / cuts paper, no burn
STARTING SETTING FROM LIBRARY — NOT YET VERIFIED
Operation: cuts paper, no burn · Source: LightBurn library (MarkParam.clb)
Starting setting from the LightBurn library, not yet verified on this machine.
Mode
Line (Cut)
Power
100 %
Speed
25 mm/s
Frequency
80 kHz
Pulse width (MOPA)
500 ns
Hatch spacing / line interval
not set
Hatch angle
not set · cross-hatch off · bidirectional off
Passes
1
Lens / field
126 × 126 mm field (lens focal length not recorded)
printer paper / None / perforated paper
STARTING SETTING FROM LIBRARY — NOT YET VERIFIED
Operation: perforated paper · Source: LightBurn library (MarkParam.clb)
Starting setting from the LightBurn library, not yet verified on this machine.
Mode
Line (Cut)
Power
100 %
Speed
50 mm/s
Frequency
80 kHz
Pulse width (MOPA)
500 ns
Hatch spacing / line interval
not set
Hatch angle
not set · cross-hatch off · bidirectional off
Passes
1
Lens / field
126 × 126 mm field (lens focal length not recorded)