Laser View — live cam · Settings index · ComMarker B4 60W MOPA fiber laser

ComMarker B4 60W MOPA copper settings for LightBurn

1 LightBurn setting for copper on a ComMarker B4 60W MOPA fiber laser. Every value below is copied from this machine's LightBurn library or run log — nothing is estimated.

VERIFIED RUNSAVED PRESET — NOT YET VERIFIEDSTARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Copper settings

Copper / General / Engrave

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Engrave · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	45 % (min power 12 %)
Speed	120 mm/s
Frequency	50 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Other materials

Stainless Steel · Aluminum · Titanium · Brass · Zinc · Tin & Pewter · Gold · Silver · Glass · Coatings (Powder Coat, Cerakote, Plating) · Steel · Plastics & Polymers · Leather · Wood · Stone (Granite, Slate) · Paper