Laser View › Settings › GlassComMarker B4 60W MOPA glass settings for LightBurn
1 LightBurn setting for glass on a ComMarker B4 60W MOPA fiber laser . Every value below is copied from this machine's LightBurn library or run log — nothing is estimated.
VERIFIED RUN SAVED PRESET — NOT YET VERIFIED STARTING SETTING FROM LIBRARY — NOT YET VERIFIED
Glass settings
Experimental / Glass (Steel Backed) / Gray
STARTING SETTING FROM LIBRARY — NOT YET VERIFIED
Operation: Gray · Source: LightBurn library (MarkParam.clb)
Starting setting from the LightBurn library, not yet verified on this machine.
Mode Fill (Scan) Power 45 % (min power 6 %) Speed 1000 mm/s Frequency not set in entry (LightBurn default) Pulse width (MOPA) 200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).) Hatch spacing / line interval 0.01 mm Hatch angle 45° · cross-hatch on · bidirectional off Passes 1 Lens / field 126 × 126 mm field (lens focal length not recorded)
Other materials Stainless Steel · Aluminum · Titanium · Brass · Copper · Zinc · Tin & Pewter · Gold · Silver · Coatings (Powder Coat, Cerakote, Plating) · Steel · Plastics & Polymers · Leather · Wood · Stone (Granite, Slate) · Paper
Settings published by Henry Elsner (Hank) III from his own ComMarker B4 60W MOPA fiber laser (LightBurn). Library entries are
starting settings from a LightBurn library, not yet verified on this machine; only entries marked
VERIFIED RUN have a logged run with a recorded result. Results depend on alloy, finish,
focus and lens — always test on scrap first.
Machine-readable: index.json · settings.csv ·
llms.txt · sitemap.xml . Data last changed 2026-09-27 20:00 Arizona time (UTC−7).
Henry Elsner (Hank) III · hankelsner.tech