Laser View — live cam · Settings index · ComMarker B4 60W MOPA fiber laser

ComMarker B4 60W MOPA stone settings for LightBurn

5 LightBurn settings for stone on a ComMarker B4 60W MOPA fiber laser. Every value below is copied from this machine's LightBurn library or run log — nothing is estimated.

Stone settings

Experimental / Rock and Stone / Engrave

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Engrave · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	35 % (min power 5 %)
Speed	2500 mm/s
Frequency	25 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Granite / Black / Gray

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Gray · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	40 % (min power 7 %)
Speed	1000 mm/s
Frequency	25 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.025 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Slate / General / Light Gray

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Light Gray · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	40 % (min power 7 %)
Speed	1000 mm/s
Frequency	25 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.01 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Slate / General / Tan

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: Tan · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	45 % (min power 7 %)
Speed	150 mm/s
Frequency	45 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.01 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Slate / General / White

STARTING SETTING FROM LIBRARY — NOT YET VERIFIED

Operation: White · Source: LightBurn library (MarkParam.clb)

Starting setting from the LightBurn library, not yet verified on this machine.

Mode	Fill (Scan)
Power	40 % (min power 7 %)
Speed	1000 mm/s
Frequency	25 kHz
Pulse width (MOPA)	200 ns (Not set in the library entry; LightBurn fills its default pulse width (shown as 200 ns).)
Hatch spacing / line interval	0.01 mm
Hatch angle	45° · cross-hatch on · bidirectional off
Passes	1
Lens / field	126 × 126 mm field (lens focal length not recorded)

Other materials

Stainless Steel · Aluminum · Titanium · Brass · Copper · Zinc · Tin & Pewter · Gold · Silver · Glass · Coatings (Powder Coat, Cerakote, Plating) · Steel · Plastics & Polymers · Leather · Wood · Paper